Rust effect
High-quality rust effect spray for creating a rough, rusty-looking surface. Suitable for many surfaces and materials, indoors and outdoors. A trendy, realistic rust effect that can only be created with an orange pre-coat (belton spectRAL, RAL 2004, Art. No.: 324032). Can be painted over with 1K topcoat tone (optional).
Conversion into a rusty look.
- Special rust effect spray
- For rusty looking surfaces
- Orange pre-coat required
- Weather resistant, for indoors and outdoors
Colour selection
The colours used appear differently on the screen and are therefore not binding for technical reasons.
rust effect
400 ml
Art. No.: 323495
There is no colour selection.
Properties
Paint structure
- Wood / wood based
1. belton basic Wood primer
2. belton special Rust effect
(Recommendation: pre-paint with Ral 2004 pure roange)
3. Can be painted over with 1K topcoat tone (optional) - Ferrous metals / Steel
1. belton basic Anti-corrosion primer (outdoor)
2. belton basic Universal primer
3. belton special Rust effect
(Recommendation: pre-paint with Ral 2004 pure roange)
4. Can be painted over with 1K topcoat tone (optional) - Plastics (paintable)
1. belton basic Plastic adhesion primer
2. belton special Rust effect
(Recommendation: pre-paint with Ral 2004 pure roange)
3. Can be painted over with 1K topcoat tone (optional) - Glass
1. belton basic Universal primer
2. belton special Rust effect
(Recommendation: pre-paint with Ral 2004 pure roange)
3. Can be painted over with 1K topcoat tone (optional)
► Note: Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. Do not spray onto synthetic resin coated surfaces because the paint may lift. The surface to be painted must be clean, dry and free of grease.
- Binding agent base: Nitro combination resins
- Spray application:
- Without Prepainting (orange) 2-3 evenly thin layers
- With Prepainting (orange) 2-3 evenly thin layers
paint into wet pre-paint layer - Layer thickness: 40-50 μm
- Spray distance: 15-25 cm
- Drying time:
- dust-dry: after approx. 10 min.
- fast-to-handling: after approx. 15-20 min.
- dry-hard: after approx. 24 hours - Recoating:
- with itself: at any time
- with 1K topcoats (tone): After 12 hours drying time.