Neon effect
Fluorescent special pigments in this neon effect paint ensure a certain kick. This allows painted objects to be upgraded with a bright neon effect, indoors and outdoors. A white primer or white surface is necessary for an optimal effect. Recommendation: Can be painted over with belton clear coat.
Bright colours.
- Fluorescent spray paint
- For a bright neon effect
- White pre-coat or white surface is required
- Weather resistant, for indoors and outdoors
Colour selection
The colours used appear differently on the screen and are therefore not binding for technical reasons.
red
400 ml
Art. No.: 323251
red
150 ml
Art. No.: 326081
orange
400 ml
Art. No.: 323252
yellow
400 ml
Art. No.: 323253
yellow
150 ml
Art. No.: 326080
green
400 ml
Art. No.: 323254
green
150 ml
Art. No.: 326083
pink
400 ml
Art. No.: 323255
pink
150 ml
Art. No.: 326082
There is no colour selection.
Properties
Paint structure
- Glass
1. belton basic Universal primer
2. White precoating / belton spraypaint (white)
3. belton special Neon effect
4. belton Clearcoat for all effects - Ferrous metals / Steel
- 1. belton basic Anti-corrosion (outdoor)
2. belton basic Universal primer
3. White precoating / belton spraypaint (white)
3. belton special Neon effect
4. belton Clearcoat for all effects - Plastics (paintable)
1. belton basic Plastic adhesion primer
2. White precoating / belton spraypaint (white)
3. belton special Neon effect
4. belton Clearcoat for all effects - Ceramics
1. belton basic Universal primer
2. White precoating / belton spraypaint (white)
3. belton special Neon effect
4. belton Clearcoat for all effects
► Note: Always prime with a white colour tone to achieve the best neon effect. The belton clearcoat for all effects (Art. No. 323 399) seals the neon paint permanently and ensures a weatherproof, light-fast and high-shine surface.
Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. The surface to be painted must be clean, dry and free of grease.
Do not spray onto objects coated with artificial resin because the paint may lift.
- Binding agent base: Nitro combination resin
- Spray application: 2 evenly thin layers
- Layer thickness: 20-25 μm
- Spray distance: 15-25 cm
- Drying times:
- dust-dry: after approx. 20 min.
- fast-to-handling: after approx. 60 min.
- dry-hard: after approx. 12 hours - Recoating:
- with itself and with clearcoat: after approx. 60 min.