Plastic adhesion primer
Special adhesion promoter for pre-treating paintable hard plastics or standard plastic parts, indoors and outdoors. The light pigmentation indicates, where the spray has already been applied.
For perfect adhesion to plastic.
- Special primer for plastics with good adhesion properties
- for all paintable hard plastics
- Check plastic surfaces for compatibility
- Weather resistant, for indoors and outdoors
Colour selection
The colours used appear differently on the screen and are therefore not binding for technical reasons.
transparent
400 ml
Art. No.: 323505
transparent
150 ml
Art. No.: 326076
There is no colour selection.
Properties
Paint structure
- Plastics (paintable)
1. belton basic Plastic adhesion primer
2. Top coat/belton paint sprays (tone)
3. Clear coat/belton clear coat (optional)
► Note: Please observe the information on the label about which plastics are suitable for the belton plastic adhesion primer. Always check compatibility. Before priming, clean, degrease and remove any rust from objects that are to be painted. To ensure optimum adhesion of the paint, sand before and after priming. The surface to be painted must be clean, dry and free of grease.
- Binding agent base: Special polymers
- Spray application: 1 evenly thin layer
- Layer thickness: 3-5 μm
- Spray distance: 15-25 cm
- Drying time:
- dust-dry: after approx. 15 min. then recoating
- fast-to-handling: after approx. 40 min.
- dry-hard: after approx. 24 hours - Recoating:
- with itself: at any time
- with all belton paints: at any time